My SkyScan Atomic Clock has lost its outside temperature reading.

Category: Knowledgebase

If your outside temperature is not showing on your clock, that may mean that the clock and the transmitter have lost their connection. To reconnect them you must first take the batteries out of both o...

112,213

(3,479)

Quick Reference Guide for Digital 4 Button Model

Category: Knowledgebase

HELPFUL INFORMATION ABOUT YOUR SKYSCAN DIGITAL ATOMIC CLOCK If you have the digital 4-button (SET, +, ALM, SNZ) model clock, you may use the following instructions to set your clock. If you have a di...

55,317

(581)

My SkyScan Atomic Clock doesn’t work.

Category: Knowledgebase

NIST provides the signal received by your radio controlled clock, but we cannot provide technical support for the clocks themselves. We didn’t manufacture them, and we are not familiar with all ...

27,769

(436)

I have an older model SkyScan Atomic Clock & new transmitter and have followed all the instructions & still do not have the outdoor temperature.

Category: Knowledgebase

If all methods of restarting the clock do not correct the outdoor temperature, it typically means that there is an internal problem with the clock itself. We suggest that you replace the clock with a ...

21,888

(406)

What does DST mean on my SkyScan Atomic Clock?

Category: Knowledgebase

What does DST mean on my Atomic Clock? DST means Daylight Saving Time. As a default, this setting it is set to be “ON”. Arizona and parts of Indiana do not recognize DST changes. The areas that observ...

21,037

(143)

I am trying to purchase a new transmitter for my SkyScan Atomic Clock that has been discontinued. Are they all available?

Category: Knowledgebase

Most of the transmitters are available, with the exception of models 81690, 86603 and 80082 (Q0082).

13,630

(512)

How does my SkyScan Atomic Clock work?

Category: Knowledgebase

The question has been well answered by the NIST.  Please refer to the following article.  Note: This link will open in another window, and take you to another website. http://www.nist.gov/p...

11,099

(91)

The two dots between the hour and minutes keep blinking on my SkyScan Atomic Clock. Is that normal?

Category: Knowledgebase

Yes, that is normal. The only digital clocks that don’t show the dots blinking are 87310, 86603, 88825, and 80083.

10,878

(257)

OF.L Reading On Clock

Category: Knowledgebase

Question: My clock is showing OF.L where the outdoor temperature should be. Answer: More often than not, it means that the transmitter needs to be replaced.

9,532

(200)

What is the maximum distance I can have the remote transmitter from my SkyScan Atomic Clock?

Category: Knowledgebase

The maximum open-air distance is 82 feet in a straight line, although you should take into account distance and resistance. Subtract 25-30 feet for an exterior wall or any obstruction that is similar ...

7,951

(148)

Do I need to change the batteries in my SkyScan Atomic Clock when I change my smoke alarm batteries?

Category: Knowledgebase

It is not necessary to change your battery that often. Change the batteries when the numbers on the clock begin to fade.

5,922

(185)

I need a new transmitter for my SkyScan Atomic Clock. Can I order one over the phone?

Category: Knowledgebase

Transmitters may be purchased through our website using a credit card or by sending a check to Equity Industries. We do not have the capability to take orders over the phone.

5,477

(272)